Kaiwa Firmware



Firmware load :

Option 1 Saving the "firmware.bin" on the SD card and restart

Option 2 ( requires the KAIWA version 2.0 or bigger to be installed first:)
Save it on the SD card with a name like "KAIWA.bin" and you will be able to load it from the "code>flasher" menu.
The same applies to the Emy firmware, so you can switch from one to another within the main menu

This function simply copies the firmware to "firmware.bin" and reboots the system while deleting the firmware.bin but keeping the original with its original name.

If the installed firmware is smaller than 1.5, proceed with the bossa-uploader like described here  http://www.polaxis.be/bossa-uploader/